Sprayboy p12

Mixing and pumping in a batch processing operation



Mixing, pumping and spraying – all with this one small machine. From now on, whenever you find yourself in a small space and need a compact and maneuverable plastering machine, the Sprayboy will always be able to help out. This versatile pump may even completely replace larger machines, which are often too cumbersome or too expensive. The Sprayboy is the ideal machine for door frames, setting anchors, fire protection, concrete refurbishment and much more.

Refurbishers with small crews should definitely take a closer look at the Sprayboy. It is small, light, versatile and extremely good value for money.

It is hard to believe that three functions can be combined in such a compact machine. It can mix, pump or spray – and changing between functions just requires the flip of a switch.

The Sprayboy really does have everything you need to help you complete small jobs quickly and profitably.

 Large machines with masses of power and countless functions are not always the ideal solution. Often a small pump like the Sprayboy is quite sufficient.

This small mortar pump is ideal for cementitious adhesive, fire-retardant plaster, and so on. It mixes, pumps, and sprays out of a hopper. It’s just the right machine for building conservationists, stucco plasterers, refurbishing companies, and painters. Suitable for e.g. anti-drumming agents, leveling compounds, flame and fire-retardant mortar, sealing slurries, joint and frame sealing compounds, paints, adhesive emulsion,  cementitious adhesive, renovation mortars, filling compounds, and mortars.


Example of filling frames– here, the mixing quality and manageability are particularly important. The Sprayboy masters these both perfectly. And a special frame filling hose (part no. 408 373) is used to fill the cavities between the wall and frame.

Example of injecting and setting anchors– Anchor elements are used to stabilize walls, ceilings, tunnels, etc. Here, you can use the Sprayboy to perfectly fill the drill holes and fix the anchors. This can be done with or without using pressure.

Example of fire protection mortar – When cable fire breaks or pipe shafts are being sealed, speed is of the essence, as fire protection mortar sets within a very short space of time. The Sprayboy mixes the fire protection mortar to the optimum quality. Then you pump it through a flexible hose into the openings and  fill the cavities. We also recommend the frame filling hose or frame filling device for this application (part no. 405 839).

These are, of course, only three of the many different ways of using the Sprayboy. It‘s best to remember the following simple formula: small job + pumpable mortar = Sprayboy. The Sprayboy is also available in a 230 V version (part no. 111 469.020). This allows you to connect it to the usual construction site power supply and become even more flexible on the site.


Part no. 111 469.060



Technical data P 12
Pump D5 short
Theor. delivery rate* 6 +12 l/min
Delivery pressure 25 bar
Delivery distance** Up to 30 m horizontal, 15 m vertical
Power connection (CE connector) 400 V / 50 Hz + 60 Hz, 16 A, 5p, 6h
Pump drive 1.4 kW at 94 rpm / 1.8 kW at 188 rpm
Hopper volume 50 l
Weight 125 kg
Length x width x height 714 x 696 x 1,437 mm
Fill height 939 mm
Maximum particle size 4 mm
Discharge connection M 35


* The delivery rate depends on the pump model. The delivery rate can vary in accordance with the pump used.

**The data is based on experience and is dependent on the materials used.



Additional equipment P 12
Standard color paintwork Standard
Cable remote control Standard
Pneumatic remote control Option



For all questions regarding Putzmeister technique please contact:

Mrs. Živilė Gaudėšienė
Mr. Rolandas Gaudėšius
Tel.: +370-686-87873
Tel.: +370-612-89588


Video about the machine: